U.S. Coast Guard Station Channel Islands Harbor to Host Safe Boating Expo, May 11

U.S. Coast Guard vessels will be open for tours at the Safe Boating Expo, but due to their popularity, reservations are required.

Boaters urged to drop off expired marine flares

Boating safety and family fun come together at the U.S. Coast Guard Station Channel Islands Harbor 14th annual Safe Boating Expo on Saturday, May 11, from 9 a.m. to 4 p.m. at 4201 South Victoria Ave., Oxnard. Included at the event is a free life jacket exchange that provides a new life jacket for every worn-out one brought to the event, as well as a free marine flare disposal opportunity offered by the Ventura Bomb Squad.

Boat Owners Association of The United States (BoatUS) is urging boaters to take advantage of the flare disposal opportunity as there are currently only two collection sites in California that will accept and dispose of outdated flares. Outdated or unserviceable flares present a safety hazard and disposal challenge for boat owners as these required emergency signaling devices must be replaced about every three seasons of boating.

read more

Spring Commissioning Checklist

As part of spring commissioning, boaters should check their boat’s fire extinguishers to see if they were included in a 2017 product safety recall of more than 40 million Kidde fire extinguishers.

With boatyards, backyards, marinas, and clubs now coming to life, spring commissioning time has arrived. Boat Owners Association of The United States (BoatUS) has a Spring Commissioning Checklist to help boaters start the season right:

Before You Launch

1. Inspect and replace hose clamps as necessary. Double-clamp fuel lines and exhaust hoses with marine-rated stainless-steel hose clamps. Keep seacocks closed when you are away from the boat.
2. Inspect all hoses for stiffness, rot, leaks and cracking, and replace any that are faulty. Make sure they fit snugly.
3. Inspect prop(s) for dings, pitting and distortion. Make sure cotter pins are secure.
4. Grip the prop (on inboard drive systems) and try moving the shaft up and down and side to side. If it’s loose and can be wiggled, the cutless bearing may need to be replaced.
5. Check the rudderstock to ensure it hasn’t been bent. Operate the wheel or tiller to ensure the steering works correctly.
6. Inspect the hull for blisters, distortions and stress cracks.
7. Make sure your engine intake sea strainer (if equipped) is not cracked or bent from ice and is free of corrosion, clean and properly secured.
8. With inboards, check the engine shaft and rudder stuffing boxes for correct adjustment. A stuffing box should leak no more than two drops each minute when the prop shaft is turning.
9. Inspect and lubricate seacocks.
10. Use a garden hose to check for deck leaks at ports and hatches. Renew caulk or gaskets as necessary.
11. Inspect the bilge pump and float switch to make sure they’re both working properly.
12. Check stove and remote LPG tanks for loose fittings and leaking hoses.
13. Inspect dock and anchor lines for chafe and wear.
14. If equipped, ensure that the stern drain plug is installed.
15. After the boat is launched, be sure to check all thru-hulls for leaks.

read more